| Sign In | Join Free | My himfr.com |
|
More Flexible, More Accurate
5 Years
| Ask Lasest Price | |
| Brand Name : | Vector |
| Model Number : | VEC-VC-00623H-M-E/130ME-00120A23-MF2M |
| Certification : | CE |
| Price : | USD 300-450 / kit |
| Payment Terms : | T/T, Western Union, L/C |
| Supply Ability : | 500 kits/month |
| Delivery Time : | 3-5 work days |
1KW 2000rpm Servo Motor Drive Servo System for Automatic Packing Machine
Servo System for Automatic Packing Machine
AC Power 220V 1KW
Three phase with 2500 pulse incremental + Hall encoder;
Modbus/CANopen/EtherCAT Commucation Protocol Type
Products Description
| Products | Absolute Servo System Kit |
| Brand | Vector |
| Model No. | VEC-VC-00623H-M-E/130ME-00120A23-MF2M |
| Power | 1KW |
| Voltage | 220V |
| Phase | Three Phase |
| Rated Speed | 2000 rpm |
| Rated Current | 6A |
| Rated Torgue | 4.77N.m |
| Communication Protocols | Modbus/CANopen/EtherCAT |
| Voltage | Control Mode | Single-phase / three-phase full-controlled rectification SVPWM modulation |
| Encoder | Encoder Feedback | 2500 pulse incremental + Hall encoder; 2500 pulse incremental; 17bit Tamagawa absolute encoder; 23bit Tamagawa absolute encoder; 24bit Nikon absolute encoder; |
| Pulse Command Input | Pulse Type | Differential input,Open collector |
| Frequency Range | Differential input:0-500kHz,pulse width greater than 1us Open collector: 0-300kHz,pulse width greater than 2.5us | |
| Pulse Mode | pulse + direction; AB pluses; CW+CCW; | |
| Analog Input | Voltage Range | -10V to 10V |
| Input Impedance | 10kΩ | |
| Maximum Frequency | 1.5kHz | |
| DI/DO Interface Type | NPN/PNP | |
| Communication Protocol Type | Modbus/CANopen/EtherCAT | |
| Digital Input | Enable Drive, Reset Drive, Torque Command A/B Switch, Torque
Command Reverse Enable, Forward Torque Limit A/B Switch, Negative Torque Limit A/B Switch, Forward Speed Limit A /B switch, negative speed limit A/B switch, forward jog, reverse jog, speed command reverse enable, main speed source A/B switch, speed stop enable, clear position count, speed mode Zero fixed, multi-speed speed selection 0, multi-speed speed selection 1, multi-speed speed selection 2, multi-speed speed selection 3, position command prohibited, position command reverse, pulse command prohibited, electronic gear ratio switch 1, position error Clear, return to zero, trigger multi-segment position, multi-segment position selection 0, multi-segment position selection 1, multi-segment position selection 2, multi-segment position selection 3, multi-segment position direction selection, zero return origin switch input, xy pulse and internal position planning switching, control Mode switch 0, control mode switch 1, enable interrupt fixed length input, cancel interrupt fixed length, trigger interrupt fixed length, first set of second set gain switch, reset fault, positive limit switch in position mode, Reverse limit switch in position mode, open and closed loop in full closed loop mode , electronic gear ratio switch 2, motor overheat input, emergency stop input, internal trigger clear, internal trigger set, internal counter count pulse, internal counter clear, speed mode UPDOWN mode UP signal, speed mode UPDOWN mode DOWN Signal, AI zero drift automatic correction. | |
| Digital Output | Driver enabled, speed arrival, speed reduction, speed increase,
zero speed, speed over limit, forward rotation, reverse rotation, fault output, forward speed limit in torque mode, torque mode In the negative speed limit, in the torque mode, the positioning is completed, the positioning is close to the output, the zero return is completed, the position error is too large, the output is interrupted by the fixed length, the software limit output is output, the brake output is Input command is valid, often OFF, always ON, torque limit output, torque arrival, internal trigger status, internal counter count arrives, speed is consistent, pulse position command is zero output | |
Details about a Servo Drive, how to select the Servo drive model
and do installation?
The panel contains 5 buttons and 5 digital tubes.
The general functions of the five buttons are shown in the table below.
| Key Name | Key function |
| Mode | mode switch, return to the previous menu |
| ▲(add) | increase flashing bit value of the LED digital tube |
| ▼(dec) | Decrease flashing digit value of the LED digital tube |
| ◄◄(shift) | Moves the blinking LED tube to the left; checks the high value of
data longer than 5 bits; Fault reset;execute Fn function |
| SET | read/write parameter values |
Installation:
● Install the driver on a dry and sturdy platform. Maintain good ventilation and
heat dissipation during installation and maintain good grounding.
● Please install in the specified direction to avoid malfunction.
● When installing, please ensure that the servo driver is kept at a specified
distance from the inner surface of the cabinet and other machines, otherwise it may cause fire or malfunction.
| Installation Environment Requirements | Atmospheric Pressure | 86~106kPa |
| Mbient Humidity | 0~55℃ | |
| Ambient Temperature | 0~90%RH | |
| IP Rating | IP20 | |
| Vibration | 0~4.9m/s^2 |
Accessories:
| Accessory name | Image | ||
| Satandard Spare Parts | Power terminal |  | Adapt to E1,E2 structure drive |
| Cn3 encoder plug | Encoder plug on the driver side | ||
| Cn4 control terminal plug | Input/output signal terminals,user wiring | ||
| Encoder connection line | The standard cable length is 3, 5, 8, 10, 13, 15 meters, according
to customer needs Provide independent connector | ||
| Power line | The standard cable length is 3, 5, 8, 10, 13, 15 meters, according
to customer needs Provide independent connector | ||
| Drive monitoring line | Connect and adjust the software for remote monitoring and firmware update | ||
| Purchasing Spare Parts | USB to RS232 Adapter cable | If necessary, self purchase | |
| Ethernet communication line | If necessary, self purchase |
Packing:
| Packing details of Servo Drive | |||||
| Products | E1(3-6A) | E2(7-12A) | E3(16-27A) | C015(32-38A) | C022(45-60A) |
| Ctn. Size | 280*208*78 | 280*208*112 | 375*290*155 | 440*296*288 | 510*305*325 |
| Packing details of Motion Controller | |||||
| Products | VA Motion | VA Expansion | VE Motion | VE Expansion(32) | VE Expansion(76) |
| Ctn. Size | 176*165*78 | 127*75*70 | 144*128*69 | 176*164*78 | 316*164*78 |
Delivery Time and Shipping Way
| Quantity | 1-5 kits | 50-100 kits | 200-500 kits |
| Delivery time | Within 3 days | 5-10 days | 15-25 days |
1. For small order we always can delivery out within 1 week.
2. Our products can be shippied via Air, Land or Sea.
Cetificates:
1. CE (EU Safety Standard);
2. IEC/EN61800-5-1:2007 (Safety requirements for electrical,
thermal and energy in Section 5-1 of the
variable speed electric driver system), corresponding to the national standard GB12668.501-2013;
3, IEC / EN61800-3: 2004 + A1 (speed control electric driver system part 3 electromagnetic compatibility
standards and its specific test methods), corresponding to the national standard GB12668.3-2012.
|
|
